SuperScrape Imp.
SuperScrape Impressions Logo Mat
SuperScrape Impressions mats feature your custom logo or artwork overlaid onto a SuperScrape mat. Multi-color images are created by molding a digitally printed polymetric material into the durable nitrile rubber surface of the mat.
✔ Clean – Surface cleats effectively remove and trap dirt and sand below shoe level to prevent tracking
✔ Safe – Certified high-traction by the National Floor Safety Institute (NFSI)
✔ Easy to Clean – Lightweight flexible design ensures easy handling and cleaning (shake off soil and hose off); can be commercially laundered
✔ Features 3/16″ thick nitrile rubber with circular surface cleats
Recommended Uses
Recommended for use in commercial and industrial settings where branding or messaging is required/preferred along with the debris removal qualities of a scraper mat. Excellent for customization with a company logo, slogan, or safety and quality reminders.
Available Sizes
2.5′ x 3′ (29″ x 34″)
3′ x 4′ (34″ x 45.5″)
3′ x 5′ (34″ x 54.5″)
3′ x 10′ (34″ x 111″)
4′ x 6′ (45″ x 67.5″)
4′ x 8′ (45″ x 95″)
6′ x 6′ (71.5″ x 72″)
6′ x 8′ (71.5″ x 96″)
Please note, mat sizes are approximate as rubber shrinks and expands in conjunction with temperature and time. Tolerable manufacturing size variance is 3-5%.
Specifications
CONSTRUCTION
Material: Nitrile rubber
Logo/Image Material: Polymeric film
Thickness: 3/16 inch (0.1875″)
STANDARDS & TESTING
- Certified high-traction by the National Floor Safety Institute (NFSI)
- Passes DOC-FF1-70 for surface flammability
- ASTM C1028-96 static coefficient of friction:
Dry 0.86
Wet 0.72
Design Specifications
A digital print on polymetric film allows customers to customize the SuperScrape mat with logos, images, and messages. PMS colors may be matched for an additional fee.*
Minimum Text Height: 1/2″ (includes lowercase text)
Minimum Line Thickness: 1/16″
These text requirements are for general use; however, special fonts and very thin letter forms may need to be made larger or thicker and will be approached on a case-by-case basis.
White is prone to discolor and cannot be used as the background or any part of the imprint area. The product’s color palette offers three light colors to use in place of White: F5, N9 and N10. The background color of the imprint area should not be set to these light colors. It is difficult to keep the logo clean through the manufacturing process.
Mat Size Imprint Area
2.5′ x 3′ (29″ x 34″) 20″ x 25″
3′ x 4′ (34″ x 45.5″) 25″ x 36″
3′ x 5′ (34″ x 54.5″) 25″ x 48″
3′ x 10′ (34″ x 111″) 25″ x 96″
4′ x 6′ (45″ x 67.5″) 36″ x 50″
4′ x 8′ (45″ x 95″) 36″ x 70″
6′ x 6′ (71.5″ x 72″) 43″ x 50″
6′ x 8′ (71.5″ x 96″) 43″ x 80″
*We will do our best to match a PMS color, however, color matching can be extremely challenging. Although we can get close, color is never an exact science and variations will occur. An exact color match is vulnerable to many factors, including the fact that we use a hot press to combine the rubber surface and cushion backing. Heat from the press often causes the color to lighten. Typically, we can get close to most PMS colors, but the final color may be a few shades off. For the PMS color to be as close as possible, we require additional time to create the proof sketch. Specific PMS colors may be matched for a one-time additional fee.
Cleaning Instructions
SuperScrape Impressions mats can be commercially laundered (see laundering instructions) or cleaned using the instructions below.
- Scrub with a deck brush (when needed) using detergent with a neutral pH.
- Rinse with a hose or pressure washer.
- Lay flat or hang to dry.
Laundering Instructions
SuperScrape Impressions mats can be commercially laundered periodically to remove soil. The formula below does not require extensive mechanical action or drying, however mats can be dried if necessary.
- Flush 2-3 minutes, medium water level, cold
- Break 5-10 minutes, high water level, 120 degrees F (49 degrees C)
- Rinse 2 minutes, high water level, cold
- Rinse 2 minutes, high water level, cold
- Drain 2 minutes
- Lay mats flat following removal from washer.